Sharp SD-HX600 SD-HX600 Operation Manual - Page 65
Mounting the wall bracket on the wall
View all Sharp SD-HX600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
! Mounting the wall bracket on the wall VESA (*) compliant fittings (commercially available) can be attached to the wall bracket. Fittings are not supplied, but can be purchased. Note: (*) VESA (Video Electronics Standards Association) is an organization to promote the standardization of digital imaging device for PCs. Types of fittings: Fittings must satisfy the following. " Compatible with the VESA standard. " Have a gap of 3.973" (100 mm) 3.973" (100 mm) between the screw holes on the section to be attached. " Sturdy and stable to prevent fall or breakage. 3.973" (100 mm) 3.973" (100 mm) Warning: " Install brackets properly following the operation manual. Improper installation may cause the main unit to fall leading to injury or breakage. " To ensure a proper installation, contact your dealer or installer. " During installation, be careful not to pinch your fingers. " The wall should be strong enough to support the weight of the main unit. (Install on a reinforced part.) " Do not impose an extra load on fittings. It may cause the main unit to fall leading to injury or breakage. " Do not modify or change the wall bracket. It may cause the main unit to fall leading to injury or breakage. Caution: " Do not block the ventilation opening of the main unit with a tablecloth, etc. Heat may be kept inside causing fire. " Select a mounting position carefully to avoid injury by hitting head. " Never step on or hang from the main unit. Pay special attention to children. It may cause injury or breakage to the main unit. " Check the wall strength. SHARP is not liable for accidents caused by insuffi- cient strength of the wall or improper mounting. " Improper mounting may cause the main unit to fall. If you need assistance, contact your dealer or installer. SD-HX600 ENGLISH Advanced Features - Mounting the unit on the wall - How to attach fittings " There are four VESA (*) screw holes on the wall bracket. You can use commer- cially available fittings for mounting. " Follow the method recommended by the bracket manufacturer. E-60