Sharp PN-L652B Operation Manual - Page 57

Specifications nProduct Specifications Model LCD component Max. resolution (pixels) Max. colors Pixel pitch Brightness (typical) Contrast ratio (typical) Viewing angle Screen active area inch (mm) Computer input signal Sync signal Plug and play Input Video terminals Serial (RS-232C) Audio Output Audio terminals USB port LAN terminal System OS CPU Memory Storage Wireless LAN Bluetooth Expansion slot Speaker output Touch Detection method Panel Computer connector Power requirement Operating temperature *2 *3 Operating humidity *3 Power consumption (input signal waiting state / standby mode *4 / off mode) Dimensions inch (mm) (excluding protrusions) Weight lbs. (kg) PN-L862B PN-L752B PN-L652B 86" Class [85-9/16 inch (217.4 cm) diagonal] TFT LCD 75" Class [74-1/2 inch (189.3 cm) diagonal] TFT LCD 65" Class [64-1/2 inch (163.9 cm) diagonal] TFT LCD 3840 x 2160 Approx. 1.07 billion colors 0.4935 mm (H) × 0.4935 mm (V) 0.42975 mm (H) × 0.42975 mm (V) 0.372 mm (H) × 0.372 mm (V) 400 cd/m2 *1 1200: 1 5000: 1 4000: 1 178° right/left/up/down (contrast ratio ≥ 10) 74-5/8 (W) x 41-15/16 (H) (1895.0 x 1066.0) 64-15/16 (W) x 36-9/16 (H) 56-1/4 (W) x 31-5/8 (H) (1650.2 x 928.3) (1428.5 x 803.5) Analog RGB (0.7 Vp-p) [75 Ω] Horizontal/vertical separate (TTL: positive/negative) VESA DDC2B Mini D-sub 15 pin, 3 rows x 1 HDMI x 3 USB Type-C x 1 D-sub 9 pin x 1 3.5 mm mini stereo jack x 1 3.5 mm mini stereo jack x 1 Digital audio output (optical) x 1 USB 3.0 compliant x 4, USB 2.0 compliant x 1 10 BASE-T/100 BASE-TX/1000 BASE-T Android 9.0 Arm Cortex-A73 processor (Quad-Core) 4GB 32GB IEEE802.11ax/ac/n/a/g/b compliant 5.0 compliant Supported protocols: A2DP, AVRCP, GATT, HID 20 V, 3.25 A (power supplied when expanding the functions with an optional part) 10 W + 10 W Infrared blocking detection method USB (3.0 compliant) (Type B) x 2 AC 100 - 240 V, 5.3 A, 50/60 Hz AC 100 - 240 V, 4.6 A, 50/60 Hz AC 100 - 240 V, 3.7 A, 50/60 Hz 41°F to 95°F (5°C to 35°C) 20% to 80% (no condensation) 470W (20W/0.5W/0.0W) 400W (20W/0.5W/0.0W) 330W (20W/0.5W/0.0W) Approx. 77-1/16 (W) x 3-3/8 Approx. 67-5/16 (W) x 3-3/8 (D) x 45-5/8 (H) (1957 x 85.7 (D) x 40-1/8 (H) (1709.4 x x 1159.5) 85.7x 1019.8) Approx. 137.8 (62.5) Approx. 109.1 (49.5) Approx. 58-5/8 (W) x 3-3/8 (D) x 35-5/16 (H) (1488.4 x 85.5 x 896.6) Approx. 80.5 (36.5) *1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the equipment, it is not possible to precisely maintain a constant level of brightness. This is the brightness of the LCD panel, not the brightness of the product. *2 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. *3 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satisfied. *4 When no optional part is attached. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. 57 E