Sharp PN-L652B Operation Manual - Page 18
Turning Power On/Off, Turning on the main power, Turning power
![]() |
View all Sharp PN-L652B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Turning Power On/Off Caution • Turn on the monitor first before turning on the computer or playback device. • When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction. Turning power on 1. Press the POWER button. Turning on the main power POWER button / Power LED Main power switch Off mode, when main power is off. Caution • The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch is on. • For a complete electrical disconnection, pull out the main plug. Status Blue lit Orange lit Blue flashing Status of the monitor Power on Sleep state (Backlight off) Power off (Standby state*) Input signal waiting state * Standby mode when "Power Save Mode" is set to on. TIPS • When the main power switch is off, the monitor cannot be turned on. • If the monitor is in the input signal waiting state and you perform the operation described below, the monitor enters standby state. - Press the POWER button on the remote control unit. - Press and hold the POWER button on the monitor. • To disable the logo screen from displaying when turning the power on, set "Logo Screen" to off on the Setup menu. • You can fix the input mode that appears after startup. Set "Start Input Mode" of "Startup & Shutdown" on the System menu. (See page 48.) E 18
![](/manual_guide/products/sharp-pnl652b-operation-manual-b6260aa/18.png)