Sharp PN-HM751 PN-HB Series PN-HM Series Operation Manual - Page 7
Mounting Precautions
![]() |
View all Sharp PN-HM751 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
MOUNTING PRECAUTIONS • This product is for use indoors. • A mounting bracket compliant with VESA specifications is required. • Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor. • Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility for accidents or injuries caused by improper mounting or mishandling. • Use the monitor with the surface perpendicular to a level surface. If necessary, the monitor may be tilted up to 20 degrees upward or downward. • This monitor should be used at an ambient temperature between 32°F (0°C) and 104°F (40°C). Provide enough space around the monitor to prevent heat from accumulating inside. For the monitor in landscape orientation 7-7/8 [200] Unit: inch [mm] 1-7/16 [35] • Adhere to the following when installing the monitor in its portrait orientation. Failing to adhere to the following may cause malfunctions. - Install the monitor such that the power LED is located on the bottom side. - S et the PORTRAIT/LANDSCAPE INSTALL in the MONITOR menu to PORTRAIT. (See page 28) - B e sure to clamp the power cord (supplied) onto the cable clamp attachment using the supplied cable clamp. When clamping the power cord, take care not to stress the terminal of the power cord. Do not bend the power cord excessively. Cable clamp attachment Cable clamp 2 2 [50] [50] 2 [50] For the monitor in portrait orientation Unit: inch [mm] 7-7/8 [200] 1-7/16 [35] 2 2 [50] [50] 2 [50] Power LED • If it is difficult to provide sufficient space for any reason such as the installation of the monitor inside a housing or of several units side-by-side, or if the ambient temperature may be outside of the range of 32°F (0°C) to 104°F (40°C), install a fan or take other measures to keep the ambient temperature within the required range. • When installing two or more monitor units side-by-side, provide space of at least 3/16 inch (5 mm) around them to prevent stress on the adjacent unit or structure due to thermal expansion. • Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. • Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction. • Do not place the monitor on a device which generates heat. Power cord (Supplied) Mounting the monitor laying flat on a surface • When using this monitor laying flat on a surface (when the monitor is tilted more than 20 degrees upward from the perpendicular in relation to a level surface), consult an authorized SHARP dealer because there are some specific mounting conditions. Adhere to the following. Failing to adhere to the following may cause malfunctions. - This monitor can be tilted up to 90 degrees upward. - S et HORIZONTAL INSTALLATION in the MONITOR menu to FACE UP. (See page 28.) - U se this monitor at the ambient temperature between 32°F (0°C) and 86°F (30°C). Provide 7-7/8 inch (200 mm) or more space between the monitor and the floor or other mounting surfaces and surrounding objects to prevent heat from accumulating inside. If it is difficult to provide sufficient space or if the ambient temperature may be outside of the range of 32°F (0°C) to 86°F (30°C), install a fan or take other measures to keep the ambient temperature within the required range. 7-7/8 [200] Unit: inch [mm] 7-7/8 [200] 7-7/8 [200] 7-7/8 [200] 7-7/8 [200] - D o not press hard on the screen or otherwise subject it to impacts. 7E
![](/manual_guide/products/sharp-pnhb651-pnhb-series-pnhm-series-operation-manual-8fe45f4/7.png)