Sharp PN-HM751 PN-HB Series PN-HM Series Operation Manual - Page 24

Menu Items Menu item details The menu will differ depending on the input mode. nSCREEN You can move the menu screen display position each time the INFORMATION button is pressed. AUTO (D-SUB) The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. Pressing the ENTER button performs adjustment. Use this automatic adjustment when you use the D-SUB to display a computer screen for the first time or when you change the setting of the computer. (See page 35.) CLOCK (D-SUB) Adjusts frequency for sampling clock for applicable video. Adjust when there is flickering in the form of vertical stripes. When using the adjustment pattern (see page 35), make adjustments so that no vertical stripe noise appears in it. PHASE (D-SUB) Adjusts sampling clock phase for applicable video. Useful when small characters appear with low contrast and/or there are flickers at corners. When using the adjustment pattern (see page 35), make adjustments so that no horizontal stripe noise appears in it. * Adjustments to PHASE should be made only after CLOCK has been correctly set. H-POS (D-SUB) Adjust the horizontal position of the image. V-POS (D-SUB) Adjust the vertical position of the image. RESOLUTION SETTING (D-SUB) H-RESOLUTION Sets proper horizontal resolution when the resolution of input signals is not recognized properly. (Adjustment may be impossible with some signals.) V-RESOLUTION Sets proper vertical resolution when the resolution of input signals is not recognized properly. (Adjustment may be impossible with some signals.) INPUT SIGNAL (D-SUB) If the resolution of the computer is one of the following, make a selection from the following options. 480 LINES...........AUTO, 640x480 or 848x480 768 LINES...........AUTO, 1024x768, 1280x768 or 1360x768 1050 LINES.........1400x1050 or 1680x1050 RESET Resets the values of the SCREEN menu items to the factory default settings. Select ON and then press the ENTER button. E 24