Sharp PN-HM751 PN-HB Series PN-HM Series Operation Manual - Page 11

Connecting Peripheral Equipment 10 11 12 13 10 4 3 1 2 98 7 65 Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables connected to the input and output terminals may cause malfunctions and the other problems. • Do not use any cable that has a damaged or deformed terminal. Using such cables may cause malfunctions. TIPS • Images may not be displayed properly depending on the computer (video card) to be connected. • Use the automatic screen adjustment when a computer screen is displayed for the first time using D-SUB or when the setting of the computer is changed. The screen is adjusted automatically when SELF ADJUST in the MONITOR menu is set to ON. • If the audio output from the playback device is connected directly to speakers or other devices, the video on the monitor may appear delayed from the audio portion. Audio should be played through this monitor by connecting the playback device to the monitor's audio input, and connecting the monitor's audio output to the speakers or other devices. • The audio input terminals used in each input mode are factory-set as follows. Input mode DisplayPort HDMI1 HDMI2 D-SUB Audio input terminal (Factory setting) DisplayPort input terminal HDMI1 input terminal HDMI2 input terminal Audio input terminal 1. HDMI1 input terminal 2. HDMI2 input terminal • Use a commercially available HDMI cable (conforming to the HDMI standard) that supports 4K. • Select the audio input terminal to be used in AUDIO SELECT of the SETUP menu. When HDMI is selected, it is not necessary to connect an audio cable to the audio input terminal. 3. DisplayPort input terminal • Use a commercially available DisplayPort cable (conforming to the DisplayPort standard) that supports 4K. • Select the audio input terminal to be used in AUDIO SELECT of the SETUP menu. When DisplayPort is selected, it is not necessary to connect an audio cable to the audio input terminal. 4. D-sub input terminal 5. Audio input terminal • Use an audio cable without resistance. • Set the audio input terminal to be used in each input mode in AUDIO SELECT on the SETUP menu. 6. RS-232C input terminal 7. RS-232C output terminal* • You can control the monitor from a computer by connecting a commercially available RS-232 straight cable between these terminals and the computer. * Use the supplied RS-232C conversion cable. 11 E