Sharp MX-B467F User Guide - Page 35
E-mailing, Configuring the e-mail server settings, Sending an e-mail, Using the control panel
![]() |
View all Sharp MX-B467F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
E-mailing 35 E-mailing Configuring the e‑mail server settings You can send scanned documents through e-mail after setting up the SMTP server. For more information on SMTP settings, contact your e‑mail provider. Using the control panel 1 From the home screen, touch Settings > E‑mail > E‑mail Setup. 2 Configure the settings. Using the Embedded Web Server 1 Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the web page correctly. 2 Click Settings > E‑mail. 3 From the E‑mail Setup section, configure the settings. 4 Click Save. Sending an e-mail Using the control panel 1 Load an original document into the ADF tray or on the scanner glass. 2 From the home screen, touch E-mail, and then enter the needed information. Note: You can also enter the recipient using the address book or shortcut number. 3 If necessary, configure the output file type settings. 4 Send the e-mail. Using the shortcut number 1 From the control panel, press #, and then enter the shortcut number using the keypad. 2 Send the e‑mail.
![](/manual_guide/products/sharp-mxb467f-user-guide-354f40f/35.png)