Sharp MX-3550V Operation Manual - MX-2630N - Page 817
Enable/Disable Settings
![]() |
View all Sharp MX-3550V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 817 highlights
SYSTEM SETTINGS►SYSTEM SETTINGS Default Verification Stamp This is used to enable or disable the default setting. Enable this to always affix the verification stamp on the original that has already been scanned using the automatic document feeder. Configure the setting for each of the following items: • E-mail/Scan/Data Entry • Fax/Internet Fax Erase Width Adjustment This is used to set the default erase width for erase function. Specify a value from 0" (0 mm) to 1" (25 mm) in increments of 1/8" (3 mm) for both edge erase and center erase. Time Specified Output of Received Data This function is available when the Received Data Image Check Setting is enabled. * This is displayed when a facsimile expansion kit or Internet fax expansion kit is installed. If "Time Specified Output of Received Data" is set to , this setting is grayed out. If "Change Password" or "Hold Setting for Received Data Print" is set to , the password entry field is grayed out. Enable/Disable Settings Settings to Disable Registration Storing from the machine, storing from Setting mode (Web version), and storing from the PC can each be separately prohibited. Disable Registering Destination from Operation Panel Disables address control from the machine. Configure the setting for each of the following items: • Group (Direct Entry) • Group (Address Book) Select All: Selects all items. Clear Checked: Clears all selections. Disable Registering Destination on Web Page Disables to store the destination from Setting mode (Web version). Configure the setting for each of the following items: • Group (Direct Entry) • Group (Address Book) • Contacts Select All: Selects all items. Clear Checked: Clears all selections. Disable Registration/Delection of All Program Items This is used to prohibit the deletion and changing of image send settings stored in job programs. Disable Registration of Memory Box Disables all types of memory box registration. Configure the setting for each of the following items: Polling Memory, Confidential, Relay Broadcast (Direct Entry), Relay Broadcast (Address Book) Disable Destination Registration Using Global Address Search This disables address control from the global address search. Configure the setting for each of the following items: E-mail, Internet Fax, Fax Disable Registration Using Network Scanner Tool This disables address control from the Network Scanner Tools. Use this option to suppress to store data of another machine through Inbound Routing of address book. Disabling of Forwarding via Network This prohibits inbound routing. 7-96
![](/manual_guide/products/sharp-mx2630n-operation-manual-mx2630n-20c243c/817.png)