Sharp MX-3550V Operation Manual - MX-2630N - Page 13
Turning On The Power
![]() |
View all Sharp MX-3550V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE TURNING ON THE POWER This section describes how to turn on/off the machine's power and how to restart the machine. Operate two power switches: the main power switch inside the front cover, located in the lower left corner, and the [Power] button on the operation panel. When a finisher (large stacker) or saddle stitch finisher (large stacker) is installed on the MX-5050V/MX-5070V/MX-6050V/ MX-6070V, open the front cover on the finisher (large stacker), or the front upper cover on the saddle stitch finisher (large stacker), before opening the front cover of the machine. Turning on the power • Turn the main power switch to the " " position. • When the main power indicator lights in green, press the [Power] button. Turning off the power Turn off the power by pressing the [Power] button, then turn the main power switch to the " " position. Restart the machine Turn off the power by pressing the [Power] button and then press it again to turn on the power. Main power indicator [Power] button The main power switch • When turning off the main power switch, press the [Power] button on the operation panel and then turn the main power switch to the " " position. In a sudden case of main power outage, turn the power for the machine back on and then turn it off in the correct order. If the machine is left for a long time with the main power having been turned off prior to the [Power] button being turned off, abnormal noises, degraded image quality or other problems may result. • Turn off both the [Power] button and the main power switch and unplug the power cord if you suspect a machine failure, if there is a bad thunderstorm nearby, or when you are moving the machine. • When using the fax or Internet fax function, always keep the main power switch in the " " position. • In order for some settings to take effect, the machine must be restarted. In some states of the machine, restarting with the [Power] button may not make the settings take effect. In this case, turn off the main power switch and then turn it on again. 1-10
![](/manual_guide/products/sharp-mx2630n-operation-manual-mx2630n-20c243c/13.png)