Sharp MX-3550V Operation Manual - MX-2630N - Page 199

COPIER►BASIC PROCEDURE FOR MAKING COPIES SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL When the original size is a non-standard size or is not detected correctly, manually specify the original size. Set the orientation of the image to ensure that the orientation of the placed original is correctly recognized. • Set the orientation and size of the original before scanning the original. • The original size is set in normal mode. Specifying the orientation of the original By specifying the starting side (top or left side) of the placed original, the orientation of the original will be correctly recognized. Finishing position settings and N-Up layout settings are specified using the recognized orientation. In Easy mode In Normal mode Original CA Preview Copies B/W Start Color Start Original No. of copies 1 Image Orientation Auto AB 8½x11 Inch Direct Entry Custom Size 5 ½x8 1/2 5 ½x8 1/2R 8 ½x11 8 ½x11R 8 ½x13 8 ½x14 11x17 8 ½x13 2/5 Color Mode 2-Sided Copy Background Adjustment Blank Page Skip Skip Blank Page in Original Copy Ratio Enlarge/Reduce Copy Preview CA Others 4 11x17 B/W Start Color Start Specifying the orientation and size of an inch-size original 1 Tap the [Original] key to set the orientation of the original. ► COPY MODE (page 2-3) 2 Tap the [Detail] key to change to normal mode. ► Changing mode from each mode (page 2-5) 3 Tap the [Original] key. 4 Tap the [Inch] tab. 2-33