Sharp LL1513D Operation Manual - Page 29
This monitor supports the VESA DDC Display
![]() |
View all Sharp LL1513D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
English Français Deutsch Specifications The DVI-I input connector pin (DVI-I connector with 29 pins) C1 C2 12345678 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C3 C4 C5 No. Function No. Function 1 TMDS data 2- 16 Hot plug detection 2 TMDS data 2+ 17 TMDS data 0- 3 TMDS data 2/4 shield 18 TMDS data 0+ 4 N.C. 19 TMDS data 0/5 shield 5 N.C. 20 N.C. 6 DDC clock 21 N.C. 7 DDC data 8 Analog vertically synchronized signal 9 TMDS data 1- 22 TMDS clock shield 23 TMDS clock + 24 TMDS clock - 10 TMDS data 1+ C1 Analog red image signal 11 TMDS data 1/3 shield C2 Analog green image signal 12 N.C. 13 N.C. 14 +5V C3 Analog blue image signal C4 Analog horizontally synchronized signal C5 Analog GND 15 GND Power management The monitor is based on the VESA DPMS and the DVI DMPM standards. To activate the power management function, the video card and the computer used with it must also conform to these standards. DPMS: Display Power Management Signalling Power DPMS mode Screen consumption H-sync V-sync ON Display on 29 W Yes Yes STANDBY No Yes SUSPEND Display off 2 W Yes No OFF No No DMPM: Digital Monitor Power Management DMPM mode Screen Power consumption ON Display on 29 W OFF Display off 2 W DDC (Plug & Play) This monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for carrying out Plug & Play functions on the monitor or computer. It transfers information such as degree of resolution between the monitor and computer. You can use this function if your computer is DDC compliant and if it is set so that it can detect the Plug & Play monitor. There are many varieties of DDC due to the differences between systems. This monitor works with DDC2B. Italiano Español English 29
![](/manual_guide/products/sharp-ll1513d-operation-manual-936c937/29.png)