Sharp BP-70M75 User Manual - Page 986
SSL/TLS Settings
![]() |
View all Sharp BP-70M75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 986 highlights
SETTING MODE►SYSTEM SETTINGS SSL/TLS Settings SSL/TLS can be used for data transmission over a network. SSL is a protocol that enables the encryption of information communicated over a network. Encrypting data makes it possible to transmit and receive sensitive information safely. Data encryption can be set by the following protocols. Setting of SSL/TLS Server Port • HTTPS: Apply SSL encryption to HTTP communication. Factory default settings: Enable • IPP-SSL: Apply SSL encryption to IPP communication. Factory default settings: Disable • Redirect HTTP to HTTPS in Device Web Page Access: When this setting is enabled, all communication that attempts to access the machine by HTTP is redirected to HTTPS. Factory default settings: Disable Client Port • HTTPS: Apply SSL encryption to HTTP communication. Factory default settings: Enable • FTPS: Apply FTP encryption to HTTP communication. Factory default settings: Enable • SMTP-SSL/TLS: Apply SMTP encryption to HTTP communication. Factory default settings: Enable • POP3-SSL/TLS: Apply SSL/TLS encryption to communication using POP3. Factory default settings: Enable • LDAP-SSL/TLS: Apply SSL/TLS encryption to communication using LDAP. Factory default settings: Enable • syslog-SSL/TLS: Apply SSL/TLS encryption when sending audit logs. Factory default settings: Enable • Verify Signature of Server Certificate of the Other Party:Validate the certificate of the server you are communicating with. Factory default settings: Disable • Use only TLS1.2: Use only TLS1.2. Factory default settings: Enable • Use only TLS1.3: Use only TLS1.3. Factory default settings: Enable Level of Encryption The encryption strength can be set to one of three levels. Factory default settings: Low 10-184
![](/manual_guide/products/sharp-bp70m75-user-manual-7c8d6f6/986.png)