Sanyo PLC-ZM5000L Owners Manual - Page 31

Basic Operation Keystone Correction If a projected picture still has keystone distortion after pressing the AUTO PC button on the remote control, correct the image manually as follows: Press the KEYSTONE button on the remote control to switch the Standard (for Vertical/Horizontal) /Corner correction adjustment. The Standard or Corner correction adjustment dialog box appears. Use the Point buttons to correct the Standard or Corner distortion. The Standard or Corner correction adjustment can be stored (see pages 44, 50). Standard Remote Control POINT buttons KEYSTONE button Reduce the lower width with the Point ▼ button. Reduce the upper width with the Point ▲ button. Reduce the right part with Point ► button. Reduce the left part with Point ◄ button. Corner correction Press the KEYSTONE button on the remote control to switch Corner correction adjustment, press the SELECT button on the remote control to select the corner you want to adjust. Reduce the top left corner Reduce the top right corner part with the Point ►▼ part with the Point ◄▼ buttons. buttons. Press the SELECT Keystone Keystone button Press the SELECT button Keystone Press the SELECT button Press the SELECT button Keystone Reduce the bottom left corner part with the Point ►▲ buttons. Reduce the bottom right corner part with the Point ◄▲ buttons. Note: • The white arrows indicate that there is no correction. • A red arrow indicates the direction of correction. • An arrow disappears at the maximum correction. • If you press and hold the KEYSTONE button for more than 3 seconds while the Standard or Corner correction dialog box is being displayed, the Standard or Corner correction adjustment will be released. • The Corner pattern can be set to Off, Red, White or Blue in the Corner pattern function. See "Keystone" on pages 44, 50. • The adjustable range is limited depending on the input signal. • Standard and Corner correction functions cannot be adjusted at the same time. If one of the functions is adjusted, and then the other one will be reset automatically. The top left corner adjustment as an example: Press the Point ▼ Keystone button Keystone Press the Point Keystone ► button 31