Sanyo PLC-ZM5000L Owners Manual - Page 12

Part Names and Functions Side Control and Indicators Side Control ① ② ③ ④ ⑤ Indicators (on the top panel) ⑧ ⑨ ⑦ ⑩ ⑪ ⑥ ⑫ ⑬ ① ON/STAND-BY button Turn the projector on or off (pp.23-24). ② MENU button Open or close the On-Screen Menu (p.25). ③ SELECT button - Execute the selected item (p.25). - Expand or compress the image in the Digital zoom mode (p.43). ④ SHUTTER button Close and open up the built-in shutter (p.27). ⑤ Point VOLUME - / + ) buttons - Select an item or adjust the value in the On-Screen Menu (p.25). - Pan the image in Digital zoom + mode (p.43). - Adjust the volume level (with Point ◄► buttons) (p.28). ⑥ LENS button Enter the focus, zoom, and lens shift adjustment mode (p.27). ⑦ INPUT button Select an input source (pp.33-35). 12 ⑧ POWER indicator - Light green while the projector is in standby mode. - Light green during operations. - Blink green in the Power management mode (p.59). ⑨ LAMP indicator Light red during operations. ⑩ WARNING TEMP. indicator Blink red when the internal temperature of the projector exceeds the operating range (pp.72, 79-80). ⑪ WARNING FILTER indicator - Blink slow when the filter is being scrolled (pp.66, 79). - Blink fast when the filter scroll is not working properly or the filter cartridge is not installed (pp.66, 81). - Light orange when the clogging of the filter is detected or the filter counter reaches a time set in the timer setting, urging immediate filter/ filter cartridge replacement (pp.65, 66, 81). ⑫ SHUTTER indicator Light blue when the shutter is closed (p.79). ⑬ LAMP REPLACE indicator Light orange when the projection lamp reaches its end of life (pp.69, 80).