SanDisk 8GB ULTRA Product Manual - Page 73
Table 5-24, Extended Error Codes, Table 5-25
UPC - 619659021566
View all SanDisk 8GB ULTRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
SanDisk CompactFlash Card OEM Product Manual ATA Command Description Table 5-24 defines the valid extended error codes for the CompactFlash Memory Card Series product. The extended error code is returned to the host in the Error Register. This command must be the next command issued to the card following the command that returned an error. Table 5-24 Extended Error Codes Extended Error Code 00h 01h 09h 20h 21h 2Fh 35h, 36h 11h 18h 05h, 30-34h, 37h, 3Eh 10h, 14h 3Ah 1Fh 0Ch, 38h, 3Bh, 3Ch, 3Fh 03h Description No error detected Self test OK (no error) Miscellaneous error Invalid command Invalid address (requested head or sector invalid) Address overflow (address too large) Supply or generated voltage out of tolerance Uncorrectable ECC error Corrected ECC error Self test or diagnostic failed ID not found Spare sectors exhausted Data transfer error/aborted command Corrupted media format Write/erase failed 5.1.17 Seek-7XH This command is effectively a NOP command to the card although it does perform a range check of cylinder and head or LBA address and returns an error if the address is out of range. Table 5-25 Seek Bit 7 6 5 4 3 2 1 0 Command (7) 7XH C/D/H (6) Cyl High (5) 1 LBA 1 Drive Head (LBA 27-24) Cylinder High (LBA 23-16) Cyl Low (4) Cylinder Low (LBA 15-8) Sec Num (3) Sector Number (LBA 7-0) Sec Cnt (2) X Feature (1) X © 2007 SanDisk Corporation 5-19 Rev. 12.0, 02/07