Rane Sixty-One Sixty-One Mixer Manual for Serato DJ - Page 10

OWNER'S MANUAL Sixty-One Overview • Includes Serato DJ software. • Includes Rane ASIO and Core Audio Drivers for Serato DJ and other audio programs. • The USB 2.0 port supports six stereo record and four stereo playback channels. • Record channels support: • Control signal for two Virtual Decks. • Record Deck 1 and Deck 2 post-fader. • Recording the Main Mix or the Mic. • FlexFx USB Insert Send to a computer. • Playback channels support: • Playback for two Virtual Decks. • USB Aux playback for the SP-6 sample player. • FlexFx USB Insert Return from computer. • 32-bit floating-point audio, 48 kHz sample rate. This switchable Mic or Line level input has 2-band full-cut tone controls. The Mic can route to FlexFX or record to a USB output. Two Program buses: • Select USB channel for playback. • Four Phono / Line Inputs. • Left / Right Pan. • 3-band full-cut tone controls. • Sweepable Low / High-pass lter. Level control for each Output: • Main Output on 1/4" TRS • Session Output on RCA FlexFX are stackable: • External Insert engages the external analog Effects Loop. • Insert engages software effects through USB, can be Serato FX or any VST / AU effects. Aux Input is from the USB playback stereo pair 5-6, usually from the Serato SP-6 sample player. You can apply FlexFX to samples. The FlexFx Loop can create a sub-mix with any combination of the two Program buses, Mic, and Aux feed, and then add external software and hardware effects. This submix may be recorded via the USB Send, or output by the analog FlexFx Loop Send. MIC 4 6 2 8 0 10 LEVEL OFF +6 HIGH OFF +6 LOW FLEXFX AUX 4 6 2 8 0 10 LEVEL FLEXFX DECK 1 THRU 21 1 2 4 6 2 8 SOURCE 0 10 LEVEL DECK 2 4 6 THRU 41 3 2 2 8 0 10 LEVEL SOURCE LEFT RIGHT PAN OFF +6 HIGH OFF +6 HIGH LEFT RIGHT PAN LOW HIGH FILTER OFF +6 MID OFF +6 MID LOW HIGH FILTER FLEXFX OFF +6 LOW OFF +6 LOW FLEX FX DRY WET DECK 1 ANALOG INSERT INSERT CUE FLEXFX DECK 2 MUTE DECK 1 AUX FLEX FX DECK 2 MUTE MIX 4 6 2 8 0 10 MAIN 4 6 2 8 0 10 SESSION OUT 4 6 2 8 0 10 SESSION IN PHONES 4 6 2 8 0 10 LEVEL CUE MAIN PAN SPLIT CUE CHANNEL SWAP DECK 1 CONTOUR REVERSE CROSSFADER CONTOUR REVERSE DECK 2 CONTOUR REVERSE DECK 1 DECK 2 Session Input may connect two mixers together, or as a general purpose auxiliary input. True Split Cue for any Deck or FlexFX submix with effects heard at the front panel 1/4" and 3.5mm headphone jacks. Mute joysticks temporarily cut the signal in any direction, also known as "transform" switches. Channel Swap switches the left or right fader between Deck 1 and Deck 2. Contour controls adjust faders and crossfader for a smooth transistion or a fast cut. Faders can be individually reversed. The Crossfader and channel faders are no-noise, no-bleed, no-contact magnetic faders. SIXTY-ONE 10