Rane SM26S Operation Manual - Page 2
Front Panel Description - manual
View all Rane SM26S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Front Panel Description MASTER INPUT 4 6 2 8 0 10 LEVEL 1 4 6 2 2 2 86 6 0 10 LEVEL 10 10 MIX / PAN 2 4 6 2 2 2 86 6 0 10 LEVEL 10 10 MIX / PAN 3 4 6 2 2 2 86 6 0 10 LEVEL 10 10 MIX / PAN 4 4 6 2 2 2 86 6 0 10 LEVEL 10 10 MIX / PAN 5 4 6 2 2 2 86 6 0 10 LEVEL 10 10 MIX / PAN 6 4 6 2 2 2 86 6 0 10 LEVEL 10 10 MIX / PAN MASTER OUTPUT 4 6 2 8 0 10 LEVEL SM26S SPLITTER MIXER POWER 1 23 45 1 MASTER INPUT LEVEL sets the gain of the Left & Right Master Input stages, with a range of Off to +12 dB. In the splitting mode, this controls the Level of all Mono channel Outputs at once (i.e., those which do not have a separate input). 2 Mono Input LEVEL controls the Level of signal through each particular channel. When fed from the MONO INPUT jack, each stage has a gain range from Off to +12 dB minimum, allowing level matching of -10 dBV equipment to +4 dBu gear. When fed via the LEFT & RIGHT MASTER IN, these LEVEL controls automatically limit to a maximum of unity gain to accommodate the +12 dB available from the Left & Right Input gain stages. 3 MIX / PAN serves two different functions: MIX: When used as a SPLITTER, this controls the mix of Left and Right Master Input program to each channel's MONO OUT. PAN: When used as a MIXER, this control pans the Mono channel Input between the LEFT and RIGHT MIX OUTPUTS. 4 MASTER OUTPUT LEVEL controls the gain of the output stages and the amount of signal at the MIX OUTPUT jacks. It does not affect the level of any of the six MONO OUTPUTs. This allows an increase in headroom to eliminate overloading due to excessive combined signal from one or more Inputs. Range of gain is from Off to 0 dB (unity). Refer to the block diagram below. 5 POWER indicator: When this yellow LED is lit, the SM26S is ready to go (when it's off, it's not). Manual-2