Rane RAD15 All RAD Specifications are included in the HAL All Specifications - Page 64

DR2 Architects & Engineers, Specification, Data Sheet - 64

Page 64 highlights

Specifications DR2 Architects & Engineers Specification The digital remote shall control either source or preset selection (radio buttons), or a list of checkbox toggles and commands, and be located up to 300 meters (1,000 feet) away from the rack room multiprocessor. The digital remote shall have a customizable backlit LCD screen for end user labeling of up to 20 controls with variable and automatic dimming feature for superior visibility under varying light conditions. The digital remote shall connect to and be powered by the rack room multiprocessor using a dedicated homerun shielded CAT 5e (or better) cable. Low communication data rates shall permit use of punch-down blocks or RJ-45 patch bays for homerun cable routing flexibility as well as relaxed minimum bend radius. The shielded CAT 5e interface shall transport power, ground and a communications channel. The digital remote shall support portable use and hot-swapping so that devices may be replaced without reprogramming or shutting down the system, and do so without audio interference. Within seconds, all settings for new or existing portable digital remotes shall be automatically downloaded from the multiprocessor along with the correct firmware permitting repeated hot-swapping - even between different vintage multiprocessors. The hardwaresoftware combination shall automatically check and display the status, location, and CAT 5e crimp and wiring integrity. Hardware and software troubleshooting indicators shall point out any and all errors. The digital remote shall fit into a 2-gang US standard electrical junction box. The digital remote shall be available in white, ivory or black, and come with a matching Decora® wallplate. The Digital Remote shall be a Rane DR2 connected to a Rane HAL multiprocessor running Rane Halogen software. DR3 Architects & Engineers Specification The digital remote shall control source or preset selection (radio buttons), or a list of checkbox toggles and commands, plus level control and be located up to 300 meters (1,000 feet) away from the multiprocessor. The digital remote shall have a customizable backlit LCD screen for end user labeling of up to 20 controls with variable and automatic backlight dimming feature for superior visibility under varying light conditions. The digital remote shall connect to and be powered by the rack room multiprocessor using a dedicated homerun shielded CAT 5e (or better) cable. Low communication data rates shall permit use of punch-down blocks or RJ-45 patch bays for homerun cable routing flexibility as well as relaxed minimum bend radius. This shielded CAT 5e interface shall transport power, ground and a communications channel. The digital remote shall support portable use and hot-swapping so that devices may be replaced without reprogramming or shutting down the system, and do so without audio interference. Within seconds, all settings for new or existing portable digital remotes shall be automatically downloaded from the multiprocessor along with the correct firmware permitting repeated hot-swapping - even between different vintage multiprocessors. The hardwaresoftware combination shall automatically check and display the status, location, and CAT 5e crimp and wiring integrity. The digital remote shall fit into a 2-gang US standard electrical junction box. The digital remote shall be available in white, ivory or black, and come with a matching Decora® wallplate. The Digital Remote shall be a Rane DR3 connected to a Rane HAL multiprocessor running Rane Halogen software. SCROLL SCROLL PUSH TO SELECT DR2 SCROLL SCROLL PUSH TO SELECT DR3 PUSH TO SELECT DR2 SCROLL PUSH TO SELECT DR2 PUSH TO SELECT DR3 SCROLL PUSH TO SELECT DR3 Trademarks • Heuristic Audio Laboratory (HAL)® • HAL and Halogen are trademarks of Rane Corporation • AMX® and the AMX logo are registered trademarks of AMX • Stardraw Control is a trademark of Stardraw.com Ltd. • Crestron® is a registered trademark of Crestron Electronics, Inc. • Decora® is a registered trademark of Leviton • Dante is a trademark of Audinate Pty Ltd, Audinate is a registered trademark of Audinate Pty Ltd. • Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. • Apple, Mac, Macintosh, iTunes, Safari, QuickTime, GarageBand, and OS X are registered trademarks of Apple Inc., registered in the U.S. and other countries. ©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5000 USA TEL 425-355-6000 FAX 425-347-7757 WEB rane.com Data Sheet - 64 All features & specifications subject to change without notice. 6-2014

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

Data Sheet - 64
Specifications
All features & specifications subject to change without notice. 6-2014
©Rane Corporation
10802 47th Ave. W.,
Mukilteo WA 98275-5000
USA
TEL 425-355-6000
FAX 425-347-7757
WEB rane.com
DR2 Architects & Engineers
Specification
°e digital remote shall control either source or preset selection
(radio buttons), or a list of checkbox toggles and commands,
and be located up to 300 meters (1,000 feet) away from the rack
room multiprocessor. °e digital remote shall have a customizable
backlit LCD screen for end user labeling of up to 20 controls with
variable and automatic dimming feature for superior visibility
under varying light conditions. °e digital remote shall connect
to and be powered by the rack room multiprocessor using a
dedicated homerun shielded CAT 5e (or better) cable. Low
communication data rates shall permit use of punch-down blocks
or RJ-45 patch bays for homerun cable routing flexibility as well
as relaxed minimum bend radius. °e shielded CAT 5e interface
shall transport power, ground and a communications channel.
°e digital remote shall support portable use and hot-swapping so
that devices may be replaced without reprogramming or shutting
down the system, and do so without audio interference. Within
seconds, all settings for new or existing portable digital remotes
shall be automatically downloaded from the multiprocessor along
with the correct firmware permitting repeated hot-swapping
– even between different vintage multiprocessors. °e hardware-
software combination shall automatically check and display
the status, location, and CAT 5e crimp and wiring integrity.
Hardware and software troubleshooting indicators shall point
out any and all errors. °e digital remote shall fit into a 2-gang
US standard electrical junction box. °e digital remote shall be
available in white, ivory or black, and come with a matching
Decora® wallplate.
°e Digital Remote shall be a Rane DR2 connected to a Rane
HAL multiprocessor running Rane Halogen software.
DR3 Architects & Engineers
Specification
°e digital remote shall control source or preset selection (radio
buttons), or a list of checkbox toggles and commands, plus level
control and be located up to 300 meters (1,000 feet) away from
the multiprocessor. °e digital remote shall have a customizable
backlit LCD screen for end user labeling of up to 20 controls with
variable and automatic backlight dimming feature for superior
visibility under varying light conditions. °e digital remote shall
connect to and be powered by the rack room multiprocessor using
a dedicated homerun shielded CAT 5e (or better) cable. Low
communication data rates shall permit use of punch-down blocks
or RJ-45 patch bays for homerun cable routing flexibility as well
as relaxed minimum bend radius. °is shielded CAT 5e interface
shall transport power, ground and a communications channel.
°e digital remote shall support portable use and hot-swapping so
that devices may be replaced without reprogramming or shutting
down the system, and do so without audio interference. Within
seconds, all settings for new or existing portable digital remotes
shall be automatically downloaded from the multiprocessor along
with the correct firmware permitting repeated hot-swapping
– even between different vintage multiprocessors. °e hardware-
software combination shall automatically check and display
the status, location, and CAT 5e crimp and wiring integrity.
°e digital remote shall fit into a 2-gang US standard electrical
junction box. °e digital remote shall be available in white, ivory
or black, and come with a matching Decora® wallplate.
°e Digital Remote shall be a Rane DR3 connected to a Rane
HAL multiprocessor running Rane Halogen software.
DR2
PUSH TO SELECT
SCROLL
DR3
PUSH TO SELECT
SCROLL
Trademarks
• Heuristic Audio Laboratory (HAL)® • HAL and Halogen are trademarks of Rane Corporation • AMX® and the AMX logo are registered trademarks of AMX
• Stardraw Control is a trademark of Stardraw.com Ltd. • Crestron® is a registered trademark of Crestron Electronics, Inc. • Decora® is a registered trademark of Leviton •
Dante is a trademark of Audinate Pty Ltd, Audinate is a registered trademark of Audinate Pty Ltd. • Windows® is a registered trademark of Microsoft Corporation in the
United States and other countries. • Apple, Mac, Macintosh, iTunes, Safari, QuickTime, GarageBand, and OS X are registered trademarks of Apple Inc., registered in the
U.S. and other countries.