Rane RAD15 All RAD Specifications are included in the HAL All Specifications - Page 44
HAL3s Specifications, Data Sheet - 44
View all Rane RAD15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Specifications 12 OVERLOAD SIGNAL MIC / LINE INPUTS 123456 OVERLOAD SIGNAL LINE OUTPUTS OVERLOAD SIGNAL ENABLED IN 1 OUT IN 2 OUT REMOTE AUDIO DEVICES 12 DIGITAL REMOTES ETHERNET STATUS HAL3s HEURISTIC AUDIO LABORATORY HAL3s Specifications Parameter Analog I/O ...Connectors ...CODEC All Inputs ...Input Impedance ...Inter-channel isolation ...CMRR Inputs: Dynamic Mic Mode ...Gain ...THD+N ...Equivalent Input Noise ...Maximum Input ...Frequency Response Inputs: Condenser Mic Mode ...Gain ...Phantom Power ...THD+N ...Equivalent Input Noise ...Maximum Input ...Frequency Response Inputs: Line+ Mode ...Gain ...THD+N ...Maximum Input ...Frequency Response ...Dynamic Range (in to out) Inputs: Line Mode ...Gain ...THD+N ...Maximum Input ...Frequency Response ...Dynamic Range (in to out) Outputs ...Impedance ...Maximum Output Specification 2 x 6 Euroblock 24-bit, 48 kHz 2.9 kΩ >100 dB 55 dB Active Balanced +30 dB to +50 dB < 0.005 % -120 dBu -18 dBV (125 mVrms) 20-20k Hz, +0.0 / -0.3 dB Active Balanced +18 dB to +38 dB +48 VDC < 0.005 % -110 dBu -6 dBV (500 mVrms) 20-20k Hz, +0.0 / -0.3 dB Active Summer 0 dB to +20 dB < 0.007 % +14 dBu 20-20k Hz, +0.0 / -0.3 dB 108 dB Active Balanced 0 dB < 0.005 % +14 dBu 20-20k Hz, +0.0 / -0.3 dB 108 dB Active Balanced 200 Ω +20.0 / +15.5 dBu Limit Conditions/Comments 2 Mic / Line / Line-plus Inputs, 6 Line Outputs 4 x 6-pin, 5 mm pitch, Green = Inputs, Orange = outputs Common specifications 1% Each leg to ground typ 20-20k Hz, unity gain, channel-to-channel min 1 kHz Microphone input mode without phantom power typ +30 dB (analog gain), 1 dB steps to +50 dB (digital gain) typ 20-20k Hz, +4 dBu out, 0 dB digital gain typ 20-20k Hz, 150 Ω source, 30 dB gain typ 1 kHz, < 0.01% THD+N +4 dBu out, 100k Ω load, Mic Input to Output Microphone input mode with 48V phantom power typ +18 dB (analog gain), 1 dB steps to +38 dB (digital gain) 10 mA max per input typ 20-20k Hz, +4 dBu out, 0 dB digital gain typ 20-20k Hz, 150 Ω source, 18 dB gain typ 1 kHz, < 0.01% THD+N +4 dBu out, 100k Ω load, Mic Input to Output Left ("+") and Right ("-") signals summed to mono typ 0 dB (analog gain), 1 dB steps to +20 dB (digital gain) typ 20-20k Hz, +4 dBu out, 0 dB digital gain typ 1 kHz, < 0.01% THD+N, each leg +4 dBu out, 100k Ω load, Line-plus Input to Output max re +20 dBu, 20 kHz BW, A weighted, Rs = 50 Ω Balanced line level input typ 0 dB (analog gain), 1 dB steps to +20 dB (digital gain) typ 20-20k Hz, +4 dBu out, 0 dB digital gain typ 1 kHz, < 0.01% THD+N +4 dBu out, 100k Ω load, Line Input to Output max re +20 dBu, 20 kHz BW, A weighted, Rs = 50 Ω 1% Each leg typ 1 kHz, 100 kΩ / 600 Ω load Data Sheet - 44