Rane RAD15 All RAD Specifications are included in the HAL All Specifications - Page 27
Room Combining with the IR2
View all Rane RAD15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
IR2 Infrared Wall Sensors The Rane IR2R and IR2S are collectively known as an IR2, working in pairs to provide an automatic way to sense the position of a movable wall or door. The IR2S sends infrared, the IR2R receives it. Mounting brackets and screws are included. A single CAT 5e cable for each door connects the IR2 to a dedicated IR Remotes port on the rear of a HAL2 or a DR4. When mounted on opposite sides of the wall, green indicators on the IR2R and IR2S are always lit. Only when the door is open and the IR2R is receiving infrared from the sender does the IR2R's amber indicator light. Depending on the IR2 mounting height and your eyeglass prescription, these indicators can usually be viewed from the floor. For an IR2 remote to control audio, the IR2 requires a connection to a HAL2, or to a DR4 connected to any HAL loaded with a suitable configuration. When doors or movable partitions are opened or closed the IR2 automatically detects this, and the audio system reconfigures itself appropriately and automatically. The IR2 will operate up to 1.5 meters (5 feet) apart. Room Combining with the IR2 Both Room Combine Processors (regular and conferencing) support custom wall layouts and auto-activation of independent room processors for each possible physical room as walls open and close. Control linking between Rane IR2s, Digital Remotes, Web Controls, or 3rd-party controllers to wall open/close toggles and room processing and volumes is exquisitely intuitive, and these combine and separate automatically as wall states change. No presets required. Use Rane AM2 Automixers to gainshare auto-mixed mics in combined rooms and separate the mix automatically as walls close. Gain-share with both in-room mics and wireless mics when cascaded into a HAL's room combine processor. This means AM2 mixers can be hot-swapped between locations for quick setup at head table discussions. HAL Applications CEILING TRACK IR2 TRANSMITTER MOVABLE WALL END VIEW IR2 RECEIVER Data Sheet - 27