Pioneer SX-S30 Instruction Manual - Page 47
If an error message is displayed, Others
![]() |
View all Pioneer SX-S30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others 8. Press ENTER with "Update" selected to start update. 0 During the update, the TV screen may go black E N depending on the updated program. In that case, check the progress on the display of this unit. The TV screen will remain black until the update is complete and the power is turned on again. 0 During the update, do not turn off, or disconnect then reconnect the USB storage device. 0 "Completed!" is displayed when the update is complete. 9. Remove the USB storage device from this unit. 10.Press Í STANDBY/ON on this unit to turn the unit into standby mode. The process is completed and your firmware is updated to the latest version. 0 Do not use Í on the remote controller. If an error message is displayed: When an error occurs, "ˎ-ˎˎ Error!" is displayed on the display of this unit. ("ˎ" represents an alphanumeric character.) Check the following: 0 ¾-01, ¾-10: USB storage device not found. Check whether the USB storage device or USB cable is correctly inserted to the USB port of this unit. Connect the USB storage device to an external power source if it has its own power supply. 0 ¾-05, ¾-13, ¾-20, ¾-21: The firmware file is not present in the root folder of the USB storage device, or the firmware file is for another model. Retry from the download of the firmware file. 0 Others: Disconnect then reconnect the AC power cord, then repeat from the beginning. 46
![](/manual_guide/products/pioneer-sxs30-instruction-manual-f22af98/47.png)