Pioneer SX-S30 Instruction Manual - Page 40
Mcacc
![]() |
View all Pioneer SX-S30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
> Before Start > Part Names > Install > Initial Setup > Playback MCACC Advanced Setup | Firmware Update | Others 1 2 Setup the speakers automatically or make desired changes to the equalizer. You can also check the values set currently for each speaker setting. E N 1. Switch the input on the TV to that assigned to the unit. 2. Press on the remote controller to display the Home screen, then select MCACC with the cursors on the remote controller and press ENTER. TV's remote controller 3. Select the item with the cursor y / z /w / x buttons of the remote controller and press ENTER to confirm your selection. 0 Change the initial values for each of the settings with the cursors w/x. 0 To return to the previous screen, press . 4. To exit the settings, press . Full Auto MCACC Place the supplied speaker setup microphone in the listening position, measure the test tones emitted by the speakers, then the unit automatically sets the optimum volume level for each speaker, the crossover frequencies, and the distance from the listening position. This also automatically adjusts the equalizers for the speakers and enables correction of distortion caused by the acoustic environment of the room. Refer to "1. Full Auto MCACC" (ÄP13) in Initial Setup for details. Manual MCACC ∫ EQ Adjust If you perform Full Auto MCACC then settings are automatic, but you can also adjust the output volume of the range of each connected speaker to suit your own preferences. You can adjust the volume of the different sound ranges for each of the speakers. You can set three different equalizers in Preset 1 to 3. You can select up to 4 bands for the Subwoofer and 9 bands for all other speakers. To use the set equalizer effects, select the preset number 39
![](/manual_guide/products/pioneer-sxs30-instruction-manual-f22af98/40.png)