Pioneer HTZ-BD91HW Owner's Manual - Page 52
Radio Operations
![]() |
View all Pioneer HTZ-BD91HW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
52 Operating Radio Operations Be sure that the antennas are connected. (Refer to the page 21) Listening to the radio 1. Press INPUT/TUNER until TUNER (FM) appears in the display window. The last received station is tuned in. 2. Press and hold TUNE (-/+) for about two seconds until the frequency indication starts to change. Scanning stops when the unit tunes in a station. Or Press TUNE (-/+) repeatedly. Deleting a saved station 1. Press PRESET (W/S) to select a preset number you want to delete. 2. Press CLEAR, the preset number will blink in the display window. 3. Press CLEAR again, to delete the selected preset number. Deleting all the saved stations Press and hold CLEAR for two seconds. "ERASE ALL" will flash up. Press CLEAR again. Then all the saved stations are deleted. 3. Adjust the volume by rotating VOLUME on the front panel or by pressing VOL (+/-) on the remote control. Presetting the Radio Stations Improving poor FM reception Press blue (D) (ST/MONO) colored button on the remote control. This will change the tuner from stereo to mono and usually improve the reception. 4 You can preset 50 stations for FM. Before tuning, make sure that you have turned down the volume. 1. Press INPUT/TUNER until the TUNER (FM) appears in the display window. 2. Select the desired frequency by using TUNE (-/+). 3. Press ENTER (b) a preset number will flash in the display window. 4. Press PRESET (W/S) to select the preset number you want. 5. Press ENTER (b). The station is stored. 6. Repeat the steps 2 to 5 to store other stations. Operating
![](/manual_guide/products/pioneer-htzbd91hw-owners-manual-9f73a23/52.png)