Pioneer HTZ-BD91HW Owner's Manual - Page 21
Antenna connection
![]() |
View all Pioneer HTZ-BD91HW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Connecting 21 Resolution Setting Antenna connection The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUTPUT jacks. You can change the resolution using [Setup] menu. 1. Press HOME MENU (n). Connect the supplied antenna for listening to the radio. 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. 3. Use W/S to select [DISPLAY] option then press D to move to the second level. 2 4. Use W/S to select the [Resolution] option then press ENTER (b) to move to the third level. Connecting 5. Use W/S to select the desired resolution then press ENTER (b) to confirm your selection. ,,Note yy If your TV does not accept the resolution you have set on the player, you can set resolution to 480p as follows: 1. Press B to open the disc tray. 2. Press Z (STOP) for more than 5 seconds. yy Since several factors affect the resolution of video output, see "Video Output Resolution" on page 62. Rear of the unit ,,Note After connecting the FM wire antenna, keep it as horizontal as possible. Be sure to fully extend the FM wire antenna.
![](/manual_guide/products/pioneer-htzbd91hw-owners-manual-9f73a23/21.png)