Pioneer HTD-330DV Operating Instructions - Page 29

Getting started 04 • Throughout this manual, 'Select' means use the cursor buttons to highlight an item on-screen, then press ENTER. • The button guide at the bottom of every OSD screen shows you which buttons you'll need to use for that screen. Playing discs The basic playback controls for playing DVD, CD, Video CD and WMA/MP3 discs are covered here. Further functions are detailed in the next chapter. 1 If the system isn't already on, press STANDBY/ON to switch on. If you're playing a DVD or Video CD, also turn on your TV and make sure that it is set to the correct video input. 2 Press OPEN/CLOSE to open the disc tray. 3 Load a disc. Load a disc with the label side facing up in the front-most disc space, using the disc tray guide to align the disc. (If you're loading a double-sided DVD disc, load it with the side you want to play face down.) STANDBY/ON OPEN/CLOSE DVD/CD VOLUME ENTER ENTER DISC 1 DISC 2 DISC 3 CD MODE DISC 4 DISC 5 DISC SKIP Disc number If you want to load more discs, press DISC SKIP (remote or front panel) to rotate the disc tray. You can load up to five discs at once. • Do not place discs in the two partially accessible disc spaces, as it easy to misalign them. Use only the front-most space. • Do not load more than one disc in a space. • Before loading or removing discs, always wait for the disc mechanism to come to a complete stop. • Do not rotate the disc tray by hand. Always use the DISC SKIP button. • Sometimes, when the disc tray mechanism is moving, the controls are inoperative. 29 En