Panasonic WVCP304 WVCP300 User Guide - Page 15

Step 4 Move the cursor to "POSITION" and press the [SET ] button. Step 5 Press the [up], [down], [right] and [left] buttons to move to the upper-left part of the area to be set, and press the [SET ] button. Step 6 Press the [up], [down], [right] and [left] buttons to move to the lower-right part of the area to be set, and press the [SET ] button. 7 Digital noise reduction function setting [DNR] The digital noise reduction function reduces noise automatically under the condition of low illu- minance. The effect level of the noise reduction function is selectable from the following. LOW: Low level of noise reduction (small residual image) HIGH (default): High level of noise reduction (large residual image) CP310 8 Black-and-white mode setting [D&N (IR) ] CP31C0P310 [D&N (ELE) ]CP31C0P300 CP300 The settings relating to the black-and-white mode can be configured. Follow the procedure below. "CAMERA SETUP" screen **CAMERA SETUP** SCENE1 ALC/ELC ALC SHUTTER OFF AGC ON(HIGH) SENS UP OFF WHITE BAL ATW1 DNR HIGH D&N(IR) AUTO1 VMD OFF RET TOP END "D&N (IR)" screen **D&N(IR) **(1) AUTO1 LEVEL DURATION TIME HIGH .I.. S L BURST(BW) ON RET TOP END Step 1 Move the cursor to "D&N (IR)" or "D&N (ELE)" and select the mode from the following. CP310 AUTO1 (default): Automatically switches between color and black-and-white images CP310 in accordance with the illuminance. The black-and-white mode is CP300 selected for dark images, and the color mode is selected for bright images. AUTO2: Used for environment illuminated by near-infrared lamp. (wavelength ≥ 800 nm) ON: Displays black-and-white images. OFF: Displays color images. 15