Panasonic WVCP304 WVCP300 User Guide - Page 13

Note: • When "SENS UP" is set to the AUTO mode, "AGC" cannot be set to "OFF". 5 Electronic sensitivity enhancement setting [SENS UP] Use of the electronic sensitivity enhancement function increases the light sensitivity of the CCD, and accordingly the image becomes brighter. The magnification is unchanged for selection of FIX, and the magnification is automatically adjusted in accordance with the illuminance of a photographic subject for selection of AUTO. The magnification of the electronic sensitivity is selectable from the following. OFF (default)/X2 AUTO/X4 AUTO/X6 AUTO/X10 AUTO/X16 AUTO/X32 AUTO/OFF/X2 FIX/X4 FIX/X6 FIX/X10 FIX/X16 FIX/X32 FIX/X64 FIX/X128 FIX/X256 FIX/X512 FIX Note: • When "ALC/ELC" is set to "ELC" or "ALC+", only the AUTO mode is enabled. • When "SHUTTER" is set to options other than "OFF", the electronic sensitivity enhance- ment setting cannot be performed and "---" appears. • When the magnification of "SENS UP" is increased, the screen becomes coarser, more whitish, or more flawed. However, this phenomenon is normal. 6 White balance setting [WHITE BAL] The white balance adjustment is selectable from the following. ATW1 (default): Activates the automatic color temperature tracking mode. The camera continuously check the color temperature of the light source and automatically adjusts the white balance. The adjustment of the color temperature ranges from approx. 2,700 K to 6,000 K. ATW2: Activates the sodium lamp automatic color temperature tracking mode. The camera automatically achieves an optimal white balance under the sodium lamp. The adjustment of the color temperature ranges from approx. 2,000 K to 6,000 K. • If the situation meets one of the followings, color may not be accurately reproduced. • The subject is mostly highly-colored. • The photographic scene is under the bright blue sky or at nightfall. • The illumination of the light illuminating the subject is insufficient. When "AWC" is selected, follow the steps below to adjust the white balance. "CAMERA SETUP" screen **CAMERA SETUP** SCENE1 ALC/ELC ALC SHUTTER OFF AGC ON(HIGH) SENS UP OFF WHITE BAL ATW1 DNR HIGH D&N(IR) AUTO1 VMD OFF RET TOP END 13