Panasonic NP-6F2 Operating & Installation Instructions - Page 33

Positioning the Dishwasher, Electrical Connection

Page 33 highlights

Installation Instruction Positioning the Dishwasher Position the Dishwasher in the desired location. The back should rest against the wall and the sides must along the adjacent cabinets or walls. The Dishwasher is equipped with Inlet Hose and Drain Hose that can be positioned either to the right or the left sides to facilitate proper installation. Levelling the Dishwasher Once the Dishwasher is positioned for levelling, the height of the Dishwasher may be altered via adjustment of the screwing level of the feet. The Dishwasher may be inclined by turning left direction and may be declined by turning right direction. In any case, the Dishwasher should not be inclined more than 2 °. Electrical Connection WARNING It is necessary to allow disconnection of this appliance from the mains supply after installation. This disconnection can be achieved by having the plug accessible or by incorporating a switch in the fixed wiring in accordance with the wiring rules. Ensure proper ground exists for earth wire before installation. Do not use an extension cord or an adapter plug with this Dishwasher. Do not cut or remove the earthing connection from the power cord under any circumstances. IMPORTANT: Correct installation is the responsibility of the installer. Any malfunction or accident resulting from the failure to follow the Installation Instructions is not covered by the warranty. 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

33
Positioning the Dishwasher
Position the Dishwasher in the desired location. The back should rest against the wall and
the sides must along the adjacent cabinets or walls. The Dishwasher is equipped with Inlet
Hose and Drain Hose that can be positioned either to the right or the left sides to facilitate
proper installation.
Levelling the Dishwasher
Once the Dishwasher is positioned for
levelling, the height of the Dishwasher may be
altered via adjustment of the screwing level
of the feet. The Dishwasher may be inclined
by turning left direction and may be declined
by turning right direction. In any case, the
Dishwasher should not be inclined more than
2 °.
Electrical Connection
WARNING
It is necessary to allow disconnection of this appliance from the mains supply
after installation.
This disconnection can be achieved by having the plug
accessible or by incorporating a switch in the fixed wiring in accordance with
the wiring rules.
Ensure proper ground exists for earth wire before installation.
Do not use an extension cord or an adapter plug with this Dishwasher.
Do not cut or remove the earthing connection from the power cord under any
circumstances.
IMPORTANT:
Correct installation is the responsibility of the installer. Any malfunction or accident
resulting from the failure to follow the Installation Instructions is not covered by the
warranty.
Installation Instruction