Panasonic DMC-GH4 Owners Manual - Page 57

2. Getting Started/Basic Operations Entering Text It is possible to enter babies' and pets' names and the locations when recording. When a screen that looks like the one on the right is displayed, you can enter characters. (Only alphabetical characters and symbols can be entered.) • Example of operation for displaying a screen: MENU > [Rec] > [Profile Setup] > [SET] > [Baby1] > [Name] > [SET] 1 Press 3/4/2/1 to select text and then press [MENU/SET] to register. • Move the cursor to [ ] and then press [MENU/SET] to switch text between [A] (capitals), [a] (lower case), [1] (numbers) and [&] (special characters). • To enter the same character again, rotate the control dial right to move the cursor. • The following operations can be performed by moving the cursor to the item and pressing [MENU/SET]: - []]: Enter a blank - [Delete]: Delete a character - [ ]: Move the entry position cursor to the left - [ ]: Move the entry position cursor to the right • A maximum of 30 characters can be entered. (Maximum of 9 characters when setting names in [Face Recog.]) • A maximum of 15 characters can be entered for and [ ]. (Maximum of 6 characters when setting names in [Face Recog.]) 2 Press 3/4/2/1 to move the cursor to [Set] and then press [MENU/SET] to end text input. • Text can be scrolled if all of the entered text does not fit on the screen. 57