Panasonic AWRP400N AWPH400 User Guide - Page 34
How To Change The Position Of The Connector Panel
![]() |
View all Panasonic AWRP400N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Pan/Tilt Control Panel AW-RP400 How to change the position of the connector panel The position of the connector panel can be changed from the rear panel to the bottom panel. ❈ Before changing the position, turn off the power. Screws!5 (bottom panel) 1 Remove the five bottom panel screws, and remove the blank panel. Remove the blank panel. 2 Remove the five rear panel screws, and remove the connector panel. Remove the connector panel. 3 Secure the blank panel to the rear panel using the screws. 4 Remove the two rubber feet from the blank panel. Blank panel Screws! 5 (rear panel) Screws! 5 (rear panel) Remove the two rubber feet. 5 Secure the connector panel to the bottom panel using the screws. Connector panel Screws!5 (bottom panel) 34
![](/manual_guide/products/panasonic-awph400-awph400-user-guide-f3eb380/34.png)
Pan/Tilt Control Panel
AW-RP400
34
How to change the position of the connector panel
The position of the connector panel can be changed from the rear panel to the bottom panel.
1
Remove the five bottom panel screws, and remove the
blank panel.
2
Remove the five rear panel screws, and remove the
connector panel.
5
Secure the connector panel to the bottom panel using the
screws.
3
Secure the blank panel to the rear panel using the
screws.
4
Remove the two rubber feet from the blank panel.
Screws
!
5 (bottom panel)
Screws
!
5
(rear panel)
Screws
!
5 (bottom panel)
Screws
!
5
(rear panel)
Remove the blank
panel.
Remove the
connector panel.
Remove the two
rubber feet.
Connector panel
Blank panel
❈
Before changing the position, turn off the power.