Panasonic AWRP400N AWPH400 User Guide - Page 20
Specifications
![]() |
View all Panasonic AWRP400N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Indoor Pan/Tilt Head AW-PH400 Specifications Supply voltage: AC 120 V, 60 Hz Power consumption: 145 W 1 indicates safety information. Genlock input: BNC Black burst or composite video signal Prompter input (PROMPTER IN): BNC Through output to PROMPTER connector Prompter output (PROMPTER OUT): D-SUB 15-pin Camera video output VIDEO: Y: Pr/C: Pb: SDI: BNC, 75-ohm output BNC, 75-ohm output BNC, 75-ohm output BNC, 75-ohm output BNC Camera, pan/tilt head control: RP/IP RJ45, RS-485, pan/tilt head control signal output Connecting cable: 10BASE-T straight cable (equivalent to UTP category 5), max. 500 meters Functions/performance: Maximum load-bearing capacity: 17.6 lbs (8 kg) Tilt range: 300 degrees (approx. ±150 degrees) The tilt range is limited to 190 degrees by the initial setting of the AW-RP400. To move beyond 190 degrees, change the AW-RP400 setting. The tilt range is subject to restrictions depending on the cable and lens of camera to be mounted on pan/tilt head. Pan range: 400 degrees (approx. ±200 degrees) Maximum operating speed: 90 degrees/sec. (Maximum operating speed with prompter mounted: 30 degrees/sec.) Repeatability: ±30" Noise level: Less than NC30 (at less than 30 degrees/sec.) Ambient operating temperature: 32°F to 113°F (0°C to +45°C) Storage temperature: -4°F to 140°F (-20°C to +60°C) Ambient operating humidity: 30% to 90% (no condensation) Dimensions (W!H!D): 12-3/8"!21"!7-3/8" (315!534!188 mm) Weight: Approx. 22.5 lbs (10.2 kg) Finish: AV ivory paint (color resembling Munsell 7.9Y6.8/0.8) Weight and Dimensions indicated above are approximate. Specifications are subject to change without notice. 20
![](/manual_guide/products/panasonic-awph400-awph400-user-guide-f3eb380/20.png)