Panasonic AJ-PX800GF Basic Operating Instructions - Page 35
Deleting the chromatic aberration compensation file from the camera
View all Panasonic AJ-PX800GF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 3 Preparation - Mounting and adjusting the lens Deleting the chromatic aberration compensation file from the camera Fig. 1 1 Set to [OFF] using main menu → [MAINTENANCE] → [CAC ADJ.] → [CAC CONTROL]. 2 In [LIST/DELETE], select the lens part no. you want to delete and press the jog dial button (or the button). (Fig. 1) A confirmation screen is displayed. 3 Select [YES], and press the jog dial button (or button). The file is deleted. When the chromatic aberration compensation data is not functioning properly When the chromatic aberration compensation function is not functioning properly, or when the chromatic aberration compensation data could not be loaded normally, the viewfinder displays an error message. Error message [CAC FILE DATA NOT FOUND] [CAC LENS DATA INVALID] [LENS INIT. NOT COMPLETED] Meaning There is no chromatic aberration compensation data matching the connected lens when the chromatic aberration compensation function is [ON]. This is displayed when the camera is turned on or the lens cable is connected. The response data from the lens is not supported, or the response contains information other than that defined in the chromatic aberration compensation data. Position detection (focus zoom) of the lens is encoder type, and initialization is not completed. Remedy Load chromatic aberration compensation data matching the connected lens to the camera. The lens is not a lens compatible with the chromatic aberration compensation function. The chromatic aberration compensation will not function, but will not cause any problems in use. Turn the focus/zoom ring to pass through the center of the operating range. @@NOTE tt When mounting lens optical system accessories (converter lens attachments), the chromatic aberration compensation function sometimes does not function properly since the optical characteristics of the lens change. In this case, set the chromatic aberration compensation function to [OFF]. tt When a focus servo is used on CANON lenses, enable recording after initialization is completed in the automatic initialization mode. Data is sometimes recording while the focus ring is moving. tt When an error message is also not displayed while the chromatic aberration compensation function is not functioning, the software version of the lens might be old. Contact the manufacturer of the lens you are using. - 35 -