Oreck HALO Owners Guide - Page 14

Maintenance ! WARNING! Performing maintenance on the vacuum while it is plugged into a wall outlet may result in unexpected vacuum operation, shock and personal injury. Always turn the vacuum OFF and unplug before performing inspection and maintenance. The HEPA Disposable Filter Dust Bag The Oreck Halo vacuum employs a disposable filter dust bag that is made with high quality HEPA material for maximum air filtration and home air quality. The HEPA disposable filter dust bag plays a crucial role by trapping the dirt and germs the vacuum suctions from your home. HEPA disposable filter dust bags have been specifically designed for use with the Oreck Halo vacuum. Filter dust bag (Replacement part number HB8PK) For maximum performance, the HEPA disposable filter dust bags need to be replaced when dirt reaches the fill line on the bag. Do not allow the bags to overfill, only replace with Oreck Halo Type HL filter dust bags. Bag stiffener To replace the HEPA disposable filter dust bag: Bag dock clip 1. Unzip the outer bag until there is enough room to remove the disposable filter dust bag. 2. Grasp the blue bag clip located just above the filter dust bag and gently pull the bag towards you. 3. Gently pull the filter dust bag by sliding the cardboard bag stiffener out of the bag dock. The Saniseal® dust seal will close automatically. 4. Replace with a new clean HEPA disposable filter dust bag (reverse steps 2 & 3). 5. Ensure the bag dock clasp clicks securely into the top plastic casing before zipping up the outer bag. Do not turn the vacuum on without a filter dust bag in place. 14