Olympus PPO-E04 Instruction Manual - Page 22
Maintenance - port
UPC - 050332155251
View all Olympus PPO-E04 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
8 Maintenance For safe use of this product, always perform maintenance after each diving session. For details, refer to "Handling After Shooting" and "Maintaining the Waterproof Function" in the PT-E series case instruction manual. Apply the same procedures to this product. ቢ After shooting, remove the inserted camera and lens, then re-seal the empty case and immerse it in tap water to remove any salt as soon as possible. ባ After making sure that the PT-E series case is completely dry, dismount this product from the case. ቤ Remove the O-rings from this product using the provided pick for removing O-rings. Take care not to damage the O-rings. ብ Remove sand and dust from the O-rings. Pinch each O-ring between your fingers and lightly rub the entire circumference to check for foreign matter, scratches and cracks. ቦ If any foreign matter is attached to the O-ring grooves, remove it using a clean, lint-free cloth or cotton swab. Also remove any foreign matter from the O-ring contact surfaces and from the port mount thread on the PT-E series case. ቧ After removing foreign matter, apply the provided grease to the O-rings and fit them into the O-ring grooves. To apply grease to each O-ring, squeeze a drop of grease about the size of a grain onto your finger and lightly rub the entire circumference of the O-ring to spread the grease thinly and evenly. E-10