NordicTrack T23.0 Instruction Manual - Page 11
Start all four Screws, and then tighten them., not overtighten the #10 x 3/4 Screws 9.
View all NordicTrack T23.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
8. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Remove and discard the two indicated screws (D). Then, lift off the Pulse Crossbar (93). 8 D Console Assembly D 9. IMPORTANT: To avoid damaging the Pulse Crossbar (93), do not use power tools and do not overtighten the #10 x 3/4" Screws (9). Orient the Pulse Crossbar (93) as shown. Attach the Pulse Crossbar to the Left and Right Handrails (86, 87) with four #10 x 3/4" Screws (9) and four #10 Star Washers (5) as shown. Start all four Screws, and then tighten them. 9 9 5 86 93 93 9 5 87 11
11
8.
Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly. Remove and discard the two indicated
screws (D). Then, lift off the Pulse Crossbar (93).
D
93
Console
Assembly
D
8
9.
IMPORTANT: To avoid damaging the Pulse
Crossbar (93), do not use power tools and do
not overtighten the #10 x 3/4" Screws (9).
Orient the Pulse Crossbar (93) as shown.
Attach the Pulse Crossbar to the Left and Right
Handrails (86, 87) with four #10 x 3/4" Screws
(9) and four #10 Star Washers (5) as shown.
Start all four Screws, and then tighten them.
93
5
9
9
5
86
9
87