NordicTrack T23.0 Instruction Manual - Page 10
Do not press the Base, Covers into place yet., Do not fully tighten, the Screws yet., Attach
View all NordicTrack T23.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
6. Remove and save the four indicated 5/16" x 3/4" Screws (4). 6 Identify the Left and Right Base Covers (82, 83). Slide the Left Base Cover onto the Left Upright (89), and slide the Right Base Cover onto the Right Upright (90). Do not press the Base Covers into place yet. Slide the Left and Right Upright Covers (84, 85) onto the Left and Right Uprights (89, 90). 4 89 84 4 82 90 85 83 7. There may be ties securing the Cage Nuts (95) in the Left and Right Handrails (86, 87). Remove the ties and make sure the Cage Nuts are in place. Remove and discard the four indicated screws (C). Hold the Right Handrail (87) near the Right Upright (90). Route the Upright Wire (81) into the bottom of the Right Handrail and out of the front. Attach the Right Handrail (87) to the Right Upright (90) with two 5/16" x 1" Flat Head Screws (28), a 5/16" x 1" Screw (25), and three 5/16" Star Washers (11). Do not fully tighten the Screws yet. Attach the Left Handrail (86) to the Left Upright (89) in the same way. 7 C 86 89 95 25 11 28 11 C 87 95 81 Tie 25 11 90 10