Nikon D7500 Reference Manual - English - Page 225
WR-R10 Wireless Remote Controller/WR-T10 Wireless Remote, ML-L3 Wireless Remote Control
View all Nikon D7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
Remote controls/ wireless remote controller/ remote cords • ML-L3 Wireless Remote Control: The ML-L3 uses a 3 V CR2025 battery. Pressing the battery-chamber latch to the right (q), insert a fingernail into the gap and open the battery chamber (w). Ensure that the battery is inserted in the correct orientation (r). • WR-R10 Wireless Remote Controller/WR-T10 Wireless Remote Controller (0 145, 147): When a WR-R10 wireless remote controller is attached, the camera can be controlled wirelessly using a WR-T10 wireless remote controller. The WR-R10 can also be used to control radio-controlled flash units. • WR-1 Wireless Remote Controller (0 147): The WR-1 can function as either a transmitter or a receiver and is used in combination either with another WR-1 or a WR-R10 or WR-T10 wireless remote controller. For example, a WR-1 can be connected to the accessory terminal for use as a receiver, allowing camera settings to be changed or the shutter to be released remotely by another WR-1 acting as a transmitter. Note: Be sure the firmware for the WR-R10 and WR-1 has been updated to the latest version. For information on firmware updates, see the Nikon website for your area. • MC-DC2 Remote Cord: Attach this 1 m (3 ft 3 in.) cord to the camera accessory terminal to release the shutter remotely. Technical Notes 225