Netgear M4300-28G User Manual - Page 37
View the Fan Status, Failure, Not Present, admin, Login
View all Netgear M4300-28G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 7. Application Information and System Information (continued) Field Description IPv4 Management Interface The IPv4 management VLAN ID of the switch. Click the displayed Management VLAN ID value to jump to the configuration page. See Configure an IPv4 Management VLAN on page 55. IPv6 Management Interface The IPv6 management VLAN ID of the switch. Click the displayed Management VLAN ID value to jump to the configuration page. See Configure an IPv6 Management VLAN on page 57. IPv4 Loopback Interface The IPv4 address and mask assigned to the loopback interface. IPv6 Loopback Interface The IPv6 prefix and prefix length assigned to the loopback interface. System Date The current date. Current SNTP Sync Status The current SNTP sync status. System SNMP OID The base object ID for the switch's enterprise MIB. System Mac Address Universally assigned network address. Service Port MAC Address The MAC address used for out-of-band connectivity. L2 MAC Address The MAC address used for communications on the Layer 2 network segment. L3 MAC Address The MAC address used for communications on the Layer 3 network segment. Current SNTP Synchronized Time The SNTP synchronized time. View the Fan Status This page shows the status of the fans in all units. These fans remove the heat generated by the power, CP,U and other chipsets, and allow the chipsets work normally. Fan status has three possible values: OK, Failure, and Not Present. To view the fan status: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Management > System Information > Fan Status. Configure System Information 37 User Manual