Netgear GSM4328PB User Manual - Page 614
Sequence Number, Action, Permit, Logging, Egress Queue, Match Every, False, Mirror Interface
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 614 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches 7. Configure the following options for the rule: • Sequence Number. Enter a whole number in the range of 1 to 2147483647. This number is used to identify the rule. An IP ACL can contain up to 1023 rules. • Action. Specify what action is taken if a packet matches the rule's criteria. The choice is Permit or Deny. • Logging. When set to Enable, logging is enabled for this ACL rule (subject to resource availability in the device). If the access list trap flag is also enabled, this causes periodic traps to be generated indicating the number of times this rule was hit during the current report interval. A fixed 5-minute report interval is used for the entire system. A trap is not issued if the ACL rule hit count is zero for the current interval. This field is visible for a Deny action. • Egress Queue. The hardware egress queue identifier used to handle all packets matching this IP ACL rule. Valid range of queue IDs is 0 to 6. This field is visible when Permit is chosen as the action. • Match Every. Select True or False. True signifies that all packets must match the selected IP ACL and rule and are either permitted or denied. In this case, since all packets match the rule, the option of configuring other match criteria is not offered. To configure specific match criteria for the rule, remove the rule and recreate it, or reconfigure Match Every to False for the other match criteria to be visible. • Mirror Interface. The specific egress interface where the matching traffic stream is copied in addition to being forwarded normally by the device. This field cannot be set if a redirect interface is already configured for the ACL rule. This field is visible for a Permit action. • Redirect Interface. The specific egress interface where the matching traffic stream is forced, bypassing any forwarding decision normally performed by the device. This field cannot be set if a mirror interface is already configured for the ACL rule. This field is enabled for a Permit action. Manage Switch Security 614 User Manual