Netgear GS305E Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 67

View Switch Information or Change the Switch Device Name

Get Netgear GS305E PDF manuals and user guides View all Netgear GS305E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

Gigabit Ethernet Smart Managed Plus Switches 5. Select System > Monitoring > Mirroring. The previous figure is an example. Your switch might provide more or fewer ports. 6. In the Destination Port menu, select the destination port. You can select a single destination port only. You cannot select a destination port that is a member of a LAG. 7. In the Source Port section, select one or more source ports by selecting the check boxes that are associated with the port numbers. You can select more than one source port. You cannot select a source port that is a member of a LAG. 8. In the Mirroring menu, select Enable. By default, mirroring is disabled. 9. Click the Apply button. Your settings are saved. View Switch Information or Change the Switch Device Name You can view the switch product name (model), serial number, MAC address, firmware version, DHCP mode, and other network information. You can also change the switch device name. To view information about the switch or change the switch device name: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. Manage and Monitor the Switch 67 User Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
5.
Select
System > Monitoring > Mirroring
.
The previous figure is an example. Your switch might provide more or fewer ports.
6.
In the
Destination Port
menu, select the destination port.
You can select a single destination port only. You cannot select a destination port
that is a member of a LAG.
7.
In the Source Port section, select one or more source ports by selecting the check
boxes that are associated with the port numbers.
You can select more than one source port. You cannot select a source port that is a
member of a LAG.
8.
In the
Mirroring
menu, select
Enable
.
By default, mirroring is disabled.
9.
Click the
Apply
button.
Your settings are saved.
View Switch Information or Change the
Switch Device Name
You can view the switch product name (model), serial number, MAC address, firmware
version, DHCP mode, and other network information.
You can also change the switch device name.
To view information about the switch or change the switch device name:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
User Manual
67
Manage and Monitor the Switch
Gigabit Ethernet Smart Managed Plus Switches