Netgear FVS338NA Reference Manual - Page 22
Router Front Panel, Table 1-1., Object Descriptions
![]() |
View all Netgear FVS338NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
FVS338 ProSafe VPN Firewall 50 Reference Manual Router Front Panel The ProSafe VPN Firewall 50 front panel shown below contains the port connections, status LEDs, and the factory defaults reset button. Power LED Figure 1-1 Test Modem Internet LED LED LEDs Local LEDs The table below describes each item on the front panel and its operation. Table 1-1. Object Descriptions Object Activity Power LED Test LED MDM LED On (Green) Off On (Amber) Blinking (Amber) Off On (Green) Internet LEDs Blinking (Green) Off Link/Act LED On (Green) Blinking (Green) Off 100 LED On (Green) Off Description Power is supplied to the router. Power is not supplied to the router. Test mode: The system is initializing or the initialization has failed. Writing to Flash memory (during upgrading or resetting to defaults). The system has booted successfully. The serial port has successfully connected to an ISP and received an IP Address. Server data is being transmitted or received by the serial port. The serial port has no link. The WAN port has detected a link with a connected Ethernet device. Data is being transmitted or received by the WAN port. The WAN port has no link. The WAN port is operating at 100 Mbps. The WAN port is operating at 10 Mbps. 1-6 Introduction v1.0, September 2006
![](/manual_guide/products/netgear-fvs338na-reference-manual-7a0b466/22.png)