NEC NP-PA1705UL-W User Manual - Page 7

Use a suitable voltage power supply., Connecting the power cord to earth, Handling the power cord

Get NEC NP-PA1705UL-W PDF manuals and user guides View all NEC NP-PA1705UL-W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Important Information WARNING • This projector is classified as either IEC/EN 62471-5:2015 risk group 2 or risk group 3 depending on the lens unit. When classified as risk group 3, this projector is intended for professional use and must be installed by professional installer to ensure safety. See page xv for risk groups. • See page xiv for Laser Safety Caution. Power supply REQUIRED Use a suitable voltage power supply. • This projector is designed to be used with a 100-240 V AC, 50/60 Hz power supply. Before using the projector, check that the power supply to which the projector is to be connected meets these requirements. • Use a power outlet as the projector's power supply. Do not connect the projector directly to electrical light wiring. Doing so is dangerous. REQUIRED Connecting the power cord to earth • This equipment is designed to be used in the condition of the power cord connected to earth. If the power cord is not connected to the earth, it may cause electric shock. Please make sure the power cord is connected to the wall outlet directly and earthed properly. Do not use a 2-pin plug converter adapter. • Be sure to connect the projector and the computer (signal source) to the same earth point. If the projector and the computer (signal source) will be connected to different earth points, fluctuations in the earth potential may cause fire or smoke. REQUIRED Handling the power cord • Please use the power cord supplied with this projector. If the supplied power cord does not satisfy requirements of your country's safety standard, and voltage and current for your region, make sure to use the power cord that conforms to and satisfies them. • The power cord you use must be approved by and comply with the safety standards of your country. Please refer to the page 38 about the power cord specification. For selecting an appropriate power cord, please check rated voltage for your region by yourself. PROHIBITED • The power cord included with this projector is exclusively for use with this projector. For safety, do not use it with other devices. Continue to next page vi

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Important Information
vi
WARNING
•
This projector is classified as either IEC/EN 62471-5:2015 risk group 2 or risk
group 3 depending on the lens unit.
When classified as risk group 3, this projector is intended for professional use
and must be installed by professional installer to ensure safety.
See page
xv
for risk groups.
• See page
xiv
for Laser Safety Caution.
Power supply
Use a suitable voltage power supply.
REQUIRED
•
This projector is designed to be used with a 100–240 V AC, 50/60 Hz power
supply. Before using the projector, check that the power supply to which the
projector is to be connected meets these requirements.
• Use a power outlet as the projector’s power supply. Do not connect the
projector directly to electrical light wiring. Doing so is dangerous.
Connecting the power cord to earth
REQUIRED
•
This equipment is designed to be used in the condition of the power cord
connected to earth. If the power cord is not connected to the earth, it may
cause electric shock. Please make sure the power cord is connected to the
wall outlet directly and earthed properly.
Do not use a 2-pin plug converter adapter.
• Be sure to connect the projector and the computer (signal source) to the
same earth point. If the projector and the computer (signal source) will be
connected to different earth points, fluctuations in the earth potential may
cause fire or smoke.
Handling the power cord
REQUIRED
•
Please use the power cord supplied with this projector. If the supplied power
cord does not satisfy requirements of your country’s safety standard, and
voltage and current for your region, make sure to use the power cord that
conforms to and satisfies them.
• The power cord you use must be approved by and
comply with the safety standards of your country.
Please refer to the page
38
about the power cord
specification.
For selecting an appropriate power cord, please check
rated voltage for your region by yourself.
PROHIBITED
•
The power cord included with this projector is exclusively for use with this
projector. For safety, do not use it with other devices.
Continue to next page