NEC NP-P547UL User Manual English - Page 160
About the ASCII Control Command, Input command
View all NEC NP-P547UL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
9. Appendix 9-7. About the ASCII Control Command This device supports the common ASCII Control Command for controlling our projector and monitor. Please visit our web site for detailed information about the command. https://www.sharp-nec-displays.com/dl/en/pj_manual/lineup.html How to connect with an external device There are two methods to connect the projector with an external device such as a computer. 1. Connection thru the serial port. Connects the projector to a computer by a serial cable (a cross cable). 2. Connection via network (LAN) Connects the projector to a computer by a LAN cable. Concerning to the type of LAN cable, please ask to your network administrator. Connection interface 1. Connection thru the serial port. Communication Protocol Item Baud rate Data length Parity bit Stop bit Flow control Communications procedure Information 38400/19200/9600/4800 bps 8 bits No parity 1 bit None Full duplex 2. Connection via network Communication Protocol (Connection via LAN) Item Communication speed Supported standard Information Set automatically (10/100 Mbps) IEEE802.3 (10BASE-T) IEEE802.3u (100BASE-TX, Auto-Negotiation) Use the TCP port number 7142 for transmitting and receiving command. Parameters for this device Input command Input terminal HDMI1 HDMI2 COMPUTER HDBaseT USB-A LAN Response hdmi1 hdmi2 computer hdbaset usb-a lan Parameter hdmi1 or hdmi hdmi2 One among computer, computer1, vga, vga1, rgb, and rgb1 hdbaset or hdbaset1 usb-a or usb-a1 lan or lan1 139