Mr. Coffee BVMC-ECMP1000 User Manual - Page 7
Select The Function
View all Mr. Coffee BVMC-ECMP1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
a. b. c. TURNING THE UNIT ON a. Make sure unit is plugged in. b. Turn unit on "I". a. b. The 3 control panel lights will start pulsing during heating until the brew and steam heaters reach the perfect temperature. Once these lights become solid, the unit is ready to use. NOTE: It is normal for the Espresso function to be ready before the Cappuccino and Latte functions. NOTE: If you leave your unit on for 15 minutes without using, your unit will go into sleep mode. Press any button to reactivate. SELECT THE FUNCTION PREPARING ESPRESSO a. Press the Espresso Button " " once to brew one single shot. b. Press the Espresso Button " " twice to brew a double shot. c. Press and hold the Espresso Button " " for 3 seconds to customize the brewing to your preference. When done, press the Espresso Button " " once again to stop brewing. For safety, unit will automatically stop after brewing 5 ounces. a. b. c. x1 x2 hold for 3 sec. The unit will start brewing the espresso according to your selection. The unit will turn off automatically and the lights will become solid indicating that the cycle has been completed. Your delicious espresso is ready to be enjoyed. 12 BVMC-ECMP1000_BVMC-ECMP1001_13ESM1.indd 13-14 NOTE: To brew less coffee than the preset serving, press the function button to stop the brewing process when the amount of coffee desired is reached. PREPARING CAPPUCCINO Prior to preparing your cappuccino, adjust the amount of froth milk according to your preference by turning the Froth Control Knob to the right for more froth and to the left for less froth. For Cappuccino, it is recommended that the Froth Control Knob be turned to the Cappuccino setting. MORE FROTH LESS FROTH NOTE: The froth intensity can be adjusted during the brewing cycle. a. Press the Cappuccino Button " " once to brew a small cup of cappuccino. b. Press the Cappuccino Button " " twice to brew a large cup of cappuccino. a. b. x1 x2 NOTE: For a small cup, use the single shot filter. For a large cup, use the double shot filter. IMPORTANT: Make sure to clean the Frothed Milk Dispensing Tube after use. See Cleaning instructions on page 15 for instructions. PREPARING LATTE Prior to preparing your latte, adjust the amount of froth according to your preference by turning the Froth Control Knob to the right for more froth and to the left for less froth. For Latte, it is recommended that the Froth Control Knob be turned to the Latte setting. MORE FROTH LESS FROTH a. Press the Latte Button " " once to brew a small cup of latte. b. Press the Latte Button " " twice to brew a large cup of latte. 13 9/30/13 2:33 PM