Marantz PM7005 PM7005 Owner Manual - English - Page 37
Connect and playback from a digital device (Coaxial/Optical), Recording, Files that can be played back
View all Marantz PM7005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Contents Connections Playback Settings Tips Appendix Connect and playback from a digital device (Coaxial/Optical) 1 Connect digital device to this unit. (v p. 22) 2 Press the input source select button (COAXIAL or OPTICAL) to switch the input source to "COAXIAL" or "OPTICAL". 3 Start playback of the digital device connected to this unit. The COAXIAL or OPTICAL input indicator flashes if this unit cannot detect the sampling frequency of the input signal. 4 Press VOLUME df to adjust the volume. Recording Audio signals input into this unit can be output to an external recording device. When recording audio from a playback device connected to this unit, audio can be recorded with the playback device still connected to this unit. 1 Press X on this unit to turn the power on. 2 Press the input source select button to switch to the input source from which you want to record. The indicator of the selected input source lights. 3 Recording starts. 0 For information on operations, see the owner's manual of the recording device. o Files that can be played back See "D/A converter" (v p. 47). NOTE 0 Do not input non-PCM signals, such as Dolby Digital, and DTS. This causes noise and could damage the speakers. 0 If the sampling frequency switches, such as from A mode to B mode in a CS broadcast, muting may operate for 1 - 2 seconds, cutting the sound. Front panel Rear panel Remote control 37 unit Index