Marantz NA6005 NA6005 Owner Manual - English - Page 92
Network Information, Network Control
View all Marantz NA6005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Contents Connections Playback Settings Tips Appendix Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network via DHCP, set "DHCP" to "On" (use the default setting). This allows this unit to use your home network. If you assign an IP address for each device, you must use the "IP Address" setting to assign an IP address to this unit and enter the information about your home network such as the gateway address and subnet mask. Network Information Display network information. Friendly Name / DHCPOn or Off / IP Address / MAC Address / SSIDz z This is displayed only while a Wi-Fi connection is enabled. Network Control Enables network communication in standby power mode. The network function can be used when in standby power On (Default): mode. Main unit operable with a network compatible controller. Off: The network function cannot be used in standby power mode. When using the Web control function or a network controller or when you want to use Bluetooth/NFC quickly when the power is off, set "Network Control" to "On". NOTE When "Network Control" is set to "On", the unit consumes more standby power. Front panel Rear panel Remote control 92 unit Index