Marantz NA6005 NA6005 Owner Manual - English - Page 29
Wireless LAN
View all Marantz NA6005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Contents Connections Playback Wireless LAN When connecting to the network via wireless LAN, connect the external antennas for Bluetooth/wireless connectivity connection to the rear panel and stand them upright. See "Settings" (v p. 94) on how to connect to a wireless LAN router. Internet Modem To WAN side Router with access point Settings Tips Appendix 0 With this unit, it is possible to use the DHCP and Auto IP functions to make the network settings automatically. 0 With this unit, it is possible to use the DHCP and Auto IP functions to make the network settings automatically. When using this unit connected to a network with no DHCP function, make the settings for the IP address, etc., at "Network". (v p. 92) 0 When using this unit, we recommend you use a router equipped with the following functions: 0 Built-in DHCP server This function automatically assigns IP addresses on the LAN. 0 Built-in 100BASE-TX switch When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater. 0 Use only a shielded STP or ScTP LAN cable which is easily available at electronics stores. (CAT-5 or greater recommended) 0 The normal shielded-type LAN cable is recommended. If a flat-type cable or unshielded-type cable is used, other devices could be affected by noise. 0 When using a WPS (Wi-Fi Protected Setup) compatible router, you can connect easily to Wi-Fi by pressing the Wi-Fi CONNECT WPS button on this unit. (See the separate "Quick Start Guide".) . Front panel Rear panel Remote control 29 unit Index