Marantz AV8805A User Guide - Page 222

Contents Connections Playback Manual Setup Perform when setting the speakers manually or when changing settings made in Audyssey® Setup. 0 If you enable new speakers in the speaker configuration menu after performing Audyssey® Setup, you will no longer be able to select Audyssey MultEQ® XT32, Audyssey Dynamic EQ® or Audyssey Dynamic Volume®. (v p. 186) 0 Changing the following settings: Speaker size (Large or Small) / Distances / Levels / Crossovers settings will not disable Audyssey® or require running Audyssey® Setup again. 0 "Manual Setup" can be used without changing the settings. Please set if necessary. Amp Assign You can change the Pre Amplifier assignment according to your speaker system. o Assign Mode Select how to use the Pre Amplifier. You need to configure the detailed settings for the speaker configuration in accordance with the selected mode. Select Assign Mode configure the corresponding detailed settings. Settings 13.1ch (Default): 11.1ch (Bi-Amp): 11.1ch + Front B: Tips Appendix 0 All Pre Amplifiers of this unit are used for MAIN ZONE. 0 You can connect speakers for up to 15.1-channels for MAIN ZONE. The pre-out output automatically switches for playing back up to 13.1channels in accordance with the input signal and sound mode when 15.1channel speakers are installed. 0 The Pre Amplifier of this unit is assigned to 2-channels for creating biamp connections with the front speaker. 0 You can connect speakers for up to 11.1-channels for MAIN ZONE. 0 The Pre Amplifier of this unit is assigned to 2-channels for connecting to the second front speaker. 0 You can switch between the desired combination of front speakers A and front speakers B. Switch the front speaker using the "Front Speaker" setting. (v p. 240) Front panel Display Rear panel 222 Remote Index