LiftMaster RSW12VDC RSW12VDC Installation Manual - Page 9
Overview Of Typical Installation, Single Gate, Dual Gate
View all LiftMaster RSW12VDC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
INTRODUCTION OVERVIEW OF TYPICAL INSTALLATION Identify your installation type (refer to the Appendix in the back of the manual for more information). SINGLE GATE Warning Sign Photoelectric Sensors Operator Edge Sensors NOTE: One or more non-contact sensors shall be located where the risk of entrapment or obstruction exists at either the opening or closing direction. Care shall be exercised to reduce the risk of nuisance tripping, such as when a vehicle, trips the sensor while the gate is still moving. Earth Ground Rod Check national and local codes for proper depth DUAL GATE Water Tight Conduit (Not provided) NOTE: Power and control wiring MUST be run in separate conduits. Warning Sign Edge Sensor Warning Sign Edge Sensor Operator Photoelectric Sensors Operator Earth Ground Rod Check national and local codes for proper depth 8 Water Tight Conduit (Not provided) NOTE: Power and control wiring MUST be run in separate conduits.