LiftMaster RSW12VDC RSW12VDC Installation Manual - Page 7
SPECIFICATIONS, External Entrapment Protection Type B1 and/or Type B2
View all LiftMaster RSW12VDC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
INTRODUCTION SPECIFICATIONS This model is intended for use in vehicular swing gate applications: Usage Classification Main AC Supply System Operating Voltage Accessory Power Solar Power Max Maximum Gate Weight/Length 90 Degree Travel Time* Maximum Travel Range* Maximum Daily Cycle Rate Maximum Duty Cycle Operating Temperature Expansion Board Inherent Entrapment Protection (Type A) External Entrapment Protection (Type B1 and/or Type B2) Class I & II 120 Vac, .5 Amps (6.5 Amps including Accessory Outlets) 12 Vdc Battery Run / Battery Backup 12 Vdc, 500mA max. for ON + SW (switched) 12 Vdc at 30 watts max. 400 lbs. (181.4 kg)/16 ft. (4.9 m) 600 lbs. (272.2 kg)/12 ft. (3.7 m) 700 lbs. (317.5 kg)/10 ft. (3 m) 800 lbs. (362.9 kg)/8 ft. (2.4 m) 1000 lbs. (543.5 kg)/6 ft. (1.8 m) < 17 seconds 115 degrees 250 cycles/day Continuous Without Heater: -20°C to 60°C (-4°F to 140°F) With Optional Heater: -40°C to 60°C (-40°F to 140°F) Optional Dual - RPM and Current Sense 3 inputs on main board - 3 photoelectric sensors and up to 2 edge sensors *Travel time and range are affected by A and B mounting dimensions 27.66" 18.77" 14.8" 6